Skip to main content

Sony KV-2780R-27S42

Less than 1 minute

Introduction

These instructions are really for KV-27S42.

Enabling 3 video inputs

Setting KV-27S42, ID-1 from 145 to 23 and saving this to memory, allows to enable 3 video inputs.

Adding the 2nd Video input

Control shift using a physical switch (independent of the below inputs)

Video 1 is routed for RGB and S-Video

  • S-Video is controlled using a separate switch to cutoff remote blanking

  • Switch using the remote

  • When Video 1 is switched and blanking is on, turn on the Video Led in the front

  • Wire the same Audio L & R for Video 1 and Video 2.

  • Video 2 is routed to component and composite input

  • Composite is controlled using a separate switch to cutoff remote blanking

  • Video 2 is switched to component using remote when switch is turned on

  • Video 3 composite input is routed to the front (future). Video 3 doesn't support S-Video.

Last update: