Skip to main content

RGB-Pi Pi2SCART Setup

Less than 1 minute

Getting RGB-Pi OS to work via Pi2SCART

Config

Working config.txt file

hdmi_timings=320 1 10 30 40 240 1 3 4 6 0 0 0 60 0 6400000 1

## RGB-Pi Custom Configuration
## IMPORTANT! hdmi_timings must be always in the first line
## hdmi_timings=<h_active_pixels> <h_sync_polarity <h_front_porch> <h_sync_pulse> <h_back_porch> <v_active_lines> <v_sync_polarity> <v_front_porch> <v_sync_pulse> <v_back_porch> <v_sync_offset_a> <v_sync_offset_b> <pixel_rep> <frame_rate> <interlaced> <pixel_freq> <aspect_ratio>
## Usable Pixel clock are : 4800000 - 6400000 - 9600000 - 19200000 and anything over 38400000

disable_overscan=1
hdmi_force_hotplug=1
config_hdmi_boost=0
dtparam=audio=on
display_rotate=0
audio_pwm_mode=2
disable_audio_dither=1
hdmi_drive=1
boot_delay=0
disable_splash=1
avoid_safe_mode=1
# if the below is not disabled there will be a lot of interference on the HDMI
#dtoverlay=pwm-2chan,pin=18,func=2,pin2=19,func2=2
framebuffer_depth=32
framebuffer_ignore_alpha=1
dtoverlay=rgb-pi
enable_dpi_lcd=1
display_default_lcd=1
dpi_group=2
dpi_mode=87
kernel=zImage
overscan_scale=0
avoid_warnings=1
gpu_mem_256=64
gpu_mem_512=128
gpu_mem_1024=256
dtparam=i2c_vc=on
force_turbo=1
temp_soft_limit=68
Last update: